 |
The Kanger T3S/MT3S Replacement Coils are 100% authentic- no clones here! These replacement coils have the optional resistance of 1.8ohms, 2.2ohms or 2.5ohms to match your preference and needs. The wicking material of the T3S tank is made of silica. This ensures distinct tastes from your E-liquids with the advantages of micro coil.
Related Products:
Kanger T3S Tank
Coil
Details:
* Wire Material:
Kanthal
Resistance
Recommended Voltage
(1.8 Ohms): 3.1V - 3.4V
(2.2 Ohms): 3.5V - 3.8V
(2.5 Ohms): 3.9V - 4.2V
Package Contents:
1x Kanger T3S/MT3S Replacement Coils 5PK
These universal coil head replacements can fit only EVOD V1, Unitank, Protank V1, Mini Protank V1 , Protank V2, Mini Protank V2 Kanger t3s , Kanger MT3s, and all Hypertank clearomizers.
How to fill your PRO Tank Bottom Feeding Clearomizer:
Hold the PRO Tank upside down with the drip tip facing down Unscrew the bottom assembly from the tube Fill with 3 ml E-Juice by tilting the PRO Tank at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank. Do not put e liquid into the center tube as it will leak out the bottom of clearomizer. Screw the bottom assembly back onto tube. Screw onto electronic cigarette device and you're ready to vape. How to change the atomizer head on Kanger PRO Tank Bottom Feeding Clearomizer: Unscrew the bottom assembly from the tube, remove the old coil and simply screw a new coil assembly into base. Fill with 3 ml E-Juice by tilting the Pro Tank at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank. Do not put e liquid into the center tube as it will leak out the bottom of clearomizer. Screw onto electronic cigarette device and you're ready to vape. Tips for using the Glass Bottom Feeding PRO Tank: The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer. When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the PRO Tank Clearomizer. Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece. The atomizer head of the PRO Tank can loosen when unscrewing the tube or base. Always secure the atomizer head before re-installing the base of the PRO Tank. It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. Always clean the battery threads before charging it. PRO Tank Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. How to change the atomizer head on T3 and MT3 Bottom Feeding Clearomizer: Unscrew the bottom assembly from the tube and simply screw a new bottom assembly into the tube. Fill with 3 ml E-Juice by tilting the clearomizer at a slight angle and dripping juice down the inside wall against the outer wall of clearomizer. Do not put e liquid into the center tube as it will leak out the bottom of clearomizer. Screw onto electronic cigarette device and you're ready to vape.
Product packaging may differ
Please note that replacement coils are FINAL SALE & SOLD AS IS. These items are not eligible to be returned
|
|
|
Good Service 
