 |
Despite its small size, the iStick is loaded with amazing features. Voltage is adjustable from 3 volts to 5.5 volts while wattage ranges from as low as 2 watts to as high as 20 watts.
The OLED screen, the up and down buttons, and the fire button are all aligned on one side of the device so it is very easy to tweak your settings. You have full control over your iStick with just a few flicks of your fingertips. The super bright OLED screen is easy to read and displays all the necessary info such as wattage, voltage, atomizer resistance, and battery level.
eleaf 20W Box Mod
Unlike many box mods that offer adjustment only in 0.1 volt and 0.5 watt levels, you can customize your iStick to change settings in 0.2V/0.2W or 0.5V/0.5W increments so you don't have to press the button so many times in order to achieve your desired hit.
The eLeaf iStick runs on a powerful 2200 mAh battery that allows you to vape all day without recharging. Even when power is low and it's time to charge, you can still use your iStick via the passthrough function. To make sure that your iStick is always ready to fire, we recommend that you purchase a USB car adapter so you can enjoy continuous vaping while on the road.
For your peace of mind, the iStick is packed with safety features such as 10-second automatic shutoff protection, short circuit protection, low voltage protection, and low power alert.
Although the iStick is designed with native 510 connection, iSmoka has included a 510-to-eGo adapter in the kit so you can use virtually any type of atomizer, clearomizer, and glassomizer on the market.
The eLeaf iStick comes in four basic colors – black, blue, silver and pink. For best results, use the iStick with an Aspire Nautilus Mini.
Tip: When holding the button up or down, settings will adjust by 0.1. Press the button again to move 0.2 increments and one more time to increase or reduce by 0.5.
eLeaf iStick features:
•2200mAh lithium ion battery
•Variable voltage (3.0 volts to 5.5 volts)
•Variable wattage (2 watts to 20 watts)
•Bright OLED screen displays battery level, atomizer resistance, wattage and voltage
•510 threading (with 510-to-eGo adapter)
•Passthrough capability
•Atomizer resistance: 1 ohm to 3 ohms
•Accurate metering
•Low voltage protection (under 3.3 volts)
•10-second automatic shutoff
•Atomizer short circuit protection
•Supports charging with a faster 1-amp wall adapter
Specifications:
•Battery capacity: 2200 mAh
•Voltage parameters: 3.0V - 5.5V
•Wattage parameters: 6W – 20W
•Thread type: 510 native (with 510-to-eGo adapter)
•Available colors: black, blue, silver, pink
•Dimensions: 2.95 inches x 1.29 inches x 0.83 inches
Note: This device is not compatible with sub-ohm atomizers. We recommend using coils no lower than 1.3 ohms.
Package Contents:
1 x eLeaf iStick 20 watt box mod
|
|
|