 |
Upgraded version of the Kanger MT3. The new "s" version now has a separate base and coil, the "s" stands for separate. The reason for the upgrade was to reduce costs and waste by making the base reusable and now the only piece that needs replacing is the coil head. And of course the reduced cost id being passed along to you when you purchase replacement coils for the MT3s Bottom Coil Clearomizer.
Fits all our eGo eCig products and come blank ready to fill with your favorite liquid! No syringe needed to fill, just screw the bottom off, fill with your favorite premium e-liquid, screw the bottom back on and you're ready for the best vaping experience ever. The advantage of bottom feeding clearomizers is the atomizer is at the bottom which is where the liquid stays when you vape meaning the wick is always wet. The Kanger MT3s Bottom Feeding Clearomizer is easy to fill, produces great flavor and vapor, and no worries of leaking or burnt wick taste.
Holds 3ml of e juice. This is a must have for serious vapers!
Replacement MT3s Atomizer Coils are available in 1.8ohm, 2.2ohm, and 2.5ohm. Coils are the same for the T3s and MT3s. If you are using a standard eGo battery the best option for you is the 1.8ohm or 2.2ohm heads. If you are using an eGo Variable Voltage Battery or a Higher Voltage Device the 2.5ohm is the best option for you.
Product Comes With:
1 - MT3s Bottom Coil Clearomizer (BCC) Metal Tube Assembly with Drip Tip
1 - MT3s Bottom Coil Clearomizer Base
1 - MT3s Bottom Coil Clearomizer 2.5ohm Atomizer Head
Comes assembled ready to fill with you favorite e-liquid
How to fill T3s Bottom Feeding Clearomizer:
Unscrew the bottom assembly from the tube
Hold the MT3s tube upside down with the drip tip facing down
Fill with 3ml E-Juice by tilting the clearomizer at a slight angle and dripping juice down the inside wall against the outer wall of clearomizer.
Do not put e-liquid into the center tube as it will leak out the bottom of clearomizer.
Screw the bottom assembly back onto tube.
Screw onto electronic cigarette device and you're ready to vape.
How to change the atomizer head on T3s and MT3s Bottom Feeding Clearomizer:
Unscrew the bottom assembly from the MT3s metal tube.
Remove the coil from the MT3s bottom assembly
Screw new coil into MT3s bottom assembly
Screw MT3s bottom assembly back onto tube
Fill with 3ml E-Juice by tilting the clearomizer at a slight angle and dripping juice down the inside wall against the outer wall of clearomizer.
Do not put e-liquid into the center tube as it will leak out the bottom of clearomizer.
Screw onto electronic cigarette device and you're ready to vape.
|
|
|
Bottom Coil 
