 |
The All NEW Innokin iTaste VV V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses. It's quick and easy!
Comes standard with;
1 - iTaste VV Version 3 800mAh Battery
1 - iTaste USB Charging / Pass-through Cable (*** Does not include USB wall adapter ***)
1 - Gift Box
1 - User Manual
The Variable Voltage / Wattage iTaste Battery allows you to change the voltage and wattage to get the exact setting to give you the flavor and vapor to meet your preferences. Battery has an LCD display to show all the settings including a puff counter to let you know how many puffs have been taken since the last time the device was turned on. The best thing about this battery is you can use it while it's charging, just plug the charging cable into the end of battery and vape away while it's being charged. You can charge using your computers USB port, using a wall adapter, or with a USB car adapter.
If you already have eGo attachments the good news is all your existing eGo and 510 attachments will work on the iTaste VV battery. If you don't already have atomizer attachments you can add them to your purchase to get everything you need to start vaping. If you don't have liquid be sure to check out our large selection of Premium Electronic Cigarette Liquids.
The more voltage the more vapor!
Specifications:
Size: 15.1*15.1*99mm
Operating Voltage: 3.3V-5.0V
Operating Wattage: 6.0W-11.0W
Maximum Current Output: 3.5 ampere
Materials: copper tube /aluminum tube + zinc alloy
Main Features
Variable Voltage:
voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.
Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.
Ohms meter:
Load Resistance Detection
Puff Counter:
The puff counter will record how many puffs you have taken. The records will be cleared when the device is turned off.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV against faulty atomizers
Over-Discharge Protection:
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.
LED Battery Indicator:
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button. The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.
Superior Battery Life:
The iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery
510 & eGo Threaded:
The iTaste VV is threaded to accept 510 and eGo type attachments
ON/OFF Battery Switch:
Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes
10-Second Cutoff:
If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released
Pass-through Feature:
The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.
Settings Retention:
The device remembers the last voltage or wattage used when switching batteries
Display Information:
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
The iTaste Variable Voltage / Wattage Electronic Cigarette Battery is compatible with all our 510 and eGo products except the eGo USB charger. This battery can only be charged with the supplied USB charging cable.
DO NOT ATTEMPT TO CHARGE WITH AN EGO USB CHARGER.
|
|
|
Great little vape! 
good